Description:

 Sormac MS Combi knife peeler + RLT-60/200 Roll reading belt

• Screw for perfectly adjustable throughput
• Adjustable speed
• Removable plates
• 240 knives
• Capacity: 500 - 600 kg per hour
• Length: 310 cm
• Width: 120 cm
• Height: 250 cm

Advantages

Patented drum suspension 

• Drum hangs freely in belts. As a result, drum rotation is quiet and stable with few wear parts as a result
• Aseptic motors
  Motors are hermetically spray-proof (IP66)
• Patented drum design MS Sorma
  Product is peeled over the entire surface and flat peeling is effectively avoided
• Drum with opening flaps MS Sormac
  Large drum hatch: hinged hatch makes the drum and conveyor screw easily accessible for cleaning and maintenance
• Hopper with seepage pump MS - Sormac
  Waste transport system
  Eccentric waste pump type EAP

The Sormac knife peelers MS are designed for continuous peeling of pre-cleaned or pre-peeled tuberous products such as potatoes, red beets, celery, etc. Especially when post-peeling peeled but also steam-peeled products, the so-called ‘eyes’ and pressure spots are excellently removed. The end product has a very smooth appearance and looks as if peeled by hand.

The product to be peeled is transported by a transport auger through a horizontal rotating drum. This drum is fitted with a large number of knives at its periphery. By varying the speed of the drum and the speed of the transport worm, dwell time and peeling quantity can be controlled.

Due to the special shape of the drum and the placement of the knives, flat peeling of the product is effectively avoided. The waste is separated directly from the product and flung out through the rotating drum. It can be collected and disposed of in a crate or waste conveyor via the waste funnel at the bottom of the machine.

In the MS-20/Combi version, non-pre-peeled product can also be peeled. A number of peeling plates are provided in the drum to replace the effect of pre-treatment.

RLT-60/200 Roller inspection table

The Sormac roller reading table consists of a transport system with transport rollers fitted with grip profile. Laterally, the transport rollers are mounted on plastic chains that are moved by the drive. This movement causes the conveyor rollers to rotate. The product lying on top is thus rotated, allowing visual inspection from all sides. The transport rollers are easy to exchange.

Technical specifications: