Cyklop Axro FQ2C kötőanyag kötegelő zsinórhoz
€ 4.450,- (ÁFA nélkül)
- Magyar
- Angol
Érvek és ellenérvek
- Alkalmas kötegelő zsinórra
Leírás:
New Cyklop Axro FQC2 binding machine.
This binder is suitable for a flower bunching line.
- With top switch sensor
- Available in right and left models
- Delivery time on request
Other models optional:
- Sensor in table top, same price
- Connected to PLC of bunching line, incl. top switch, string end detection (included 8 pin connector to connect to the PLC of the bunching line), € 100,-
- PLC control, without own switch sensor. Same price.
- 3K suitable for string with 3 cores, € 50,-
- Stainless steel, € 150,-
- 100 - 120 Volt, same price
The Cyklop Axro FQC2 elastic binder is the elastic binder known in the industry. Speed, security and seamless working with this machine is guaranteed. There is no better choice than this Cyklop Rubber Binder.
Features of the AXRO FQC2:
- Can be integrated into automatic machine lines
- Extremely easy operation
- All functions are executed automatically after triggering
- Robust, capable of continuous operation
- Minimal maintenance
- Low noise
- Mobile, trolley available as an accessory
The AXRO-FQC2 is the latest development in the field of modern binding technology. This machine is provided with the well-known AXRO gripping and knotting technogoly, which has been succesfully used for many years. The AXRO-FQC2 is provided with a renewed “feed-in” mechanism, which takes care of the product being binded properly, in spite of a too early binding timing. This unit is also equipped with a knotter-release system (KRS), which controls the release of the knot. Due to this there will be pulled minimally at the product, so that there will be no damages. Wear at the knotterunit is, thanks to the KRS, reduced to a minimum, so that the reliability increases. By placing the whole on a flat aluminium baseplate, the noise will be reduced strongly.
SpecificationsAXRO FQC2:
- Capacity up to 6000 cycles / hour
- Power supply 200-240 V, 50/ 60 Hz, 1 ph. (On request 100-120V, 50/ 60 Hz, 1 ph.)
- Feed through height 150 mm, depth 250 mm
- Bench stainless steel
- Machine weight 47 kg
- Push-in from left (standard) to right
- Trigger on top or on table
- String tension adjustable
Műszaki specifikációk::
Típus: | AXRO FQC2 TS |
Kiadási év: | 2023 |
Érvek és ellenérvek
- Alkalmas kötegelő zsinórra
Description:
New Cyklop Axro FQC2 binding machine.
This binder is suitable for a flower bunching line.
- With top switch sensor
- Available in right and left models
- Delivery time on request
Other models optional:
- Sensor in table top, same price
- Connected to PLC of bunching line, incl. top switch, string end detection (included 8 pin connector to connect to the PLC of the bunching line), € 100,-
- PLC control, without own switch sensor. Same price.
- 3K suitable for string with 3 cores, € 50,-
- Stainless steel, € 150,-
- 100 - 120 Volt, same price
The Cyklop Axro FQC2 elastic binder is the elastic binder known in the industry. Speed, security and seamless working with this machine is guaranteed. There is no better choice than this Cyklop Rubber Binder.
Features of the AXRO FQC2:
- Can be integrated into automatic machine lines
- Extremely easy operation
- All functions are executed automatically after triggering
- Robust, capable of continuous operation
- Minimal maintenance
- Low noise
- Mobile, trolley available as an accessory
The AXRO-FQC2 is the latest development in the field of modern binding technology. This machine is provided with the well-known AXRO gripping and knotting technogoly, which has been succesfully used for many years. The AXRO-FQC2 is provided with a renewed “feed-in” mechanism, which takes care of the product being binded properly, in spite of a too early binding timing. This unit is also equipped with a knotter-release system (KRS), which controls the release of the knot. Due to this there will be pulled minimally at the product, so that there will be no damages. Wear at the knotterunit is, thanks to the KRS, reduced to a minimum, so that the reliability increases. By placing the whole on a flat aluminium baseplate, the noise will be reduced strongly.
SpecificationsAXRO FQC2:
- Capacity up to 6000 cycles / hour
- Power supply 200-240 V, 50/ 60 Hz, 1 ph. (On request 100-120V, 50/ 60 Hz, 1 ph.)
- Feed through height 150 mm, depth 250 mm
- Bench stainless steel
- Machine weight 47 kg
- Push-in from left (standard) to right
- Trigger on top or on table
- String tension adjustable
200-240V 50-60Hz
Cyklop Axro FQ2C kötőanyag kötegelő zsinórhoz
€ 4.450,- (ÁFA nélkül)
Kérem, hívjon Tatiana
Boldogan segítünk Önnek. Ügyfélszolgálati munkatársaink várják a hívását.
Hívjon minket: +31 180 632 088Szeretne információt kapni hasonló gépekről?
Legyen Ön az első, aki a postafiókján keresztül értesül a legutóbb felkerült, az alábbi jellemzők bármelyikével rendelkező gépekről.
Leírás:
New Cyklop Axro FQC2 binding machine.
This binder is suitable for a flower bunching line.
- With top switch sensor
- Available in right and left models
- Delivery time on request
Other models optional:
- Sensor in table top, same price
- Connected to PLC of bunching line, incl. top switch, string end detection (included 8 pin connector to connect to the PLC of the bunching line), € 100,-
- PLC control, without own switch sensor. Same price.
- 3K suitable for string with 3 cores, € 50,-
- Stainless steel, € 150,-
- 100 - 120 Volt, same price
The Cyklop Axro FQC2 elastic binder is the elastic binder known in the industry. Speed, security and seamless working with this machine is guaranteed. There is no better choice than this Cyklop Rubber Binder.
Features of the AXRO FQC2:
- Can be integrated into automatic machine lines
- Extremely easy operation
- All functions are executed automatically after triggering
- Robust, capable of continuous operation
- Minimal maintenance
- Low noise
- Mobile, trolley available as an accessory
The AXRO-FQC2 is the latest development in the field of modern binding technology. This machine is provided with the well-known AXRO gripping and knotting technogoly, which has been succesfully used for many years. The AXRO-FQC2 is provided with a renewed “feed-in” mechanism, which takes care of the product being binded properly, in spite of a too early binding timing. This unit is also equipped with a knotter-release system (KRS), which controls the release of the knot. Due to this there will be pulled minimally at the product, so that there will be no damages. Wear at the knotterunit is, thanks to the KRS, reduced to a minimum, so that the reliability increases. By placing the whole on a flat aluminium baseplate, the noise will be reduced strongly.
SpecificationsAXRO FQC2:
- Capacity up to 6000 cycles / hour
- Power supply 200-240 V, 50/ 60 Hz, 1 ph. (On request 100-120V, 50/ 60 Hz, 1 ph.)
- Feed through height 150 mm, depth 250 mm
- Bench stainless steel
- Machine weight 47 kg
- Push-in from left (standard) to right
- Trigger on top or on table
- String tension adjustable
Miért döntene a használt gép mellett?
- Gyorsan elérhető
- Kisebb beszerzési költség
- Alacsonyabb amortizációs költség
- Megegyező funkcionalitás
A következő tételeket tartalmazó sorba tartozott:
Hasonló gépek
Érdekli Ön ez a gép?
A következő lehetőségeket tudjuk felajánlani Önnek:
Árajánlatkérés
Kérem, küldjenek nekem árajánlatot erre a gépre.
Hozzá szeretném adni ezt a gépet kívánságlistámhoz, és tovább válogatnék.
Válassza ezt a lehetőséget, ha több gépre is szeretne árajánlatot kérni.
Van egy kérdésem erre a gépre vonatkozóan.
Érdekel ez a gép, de előbb egy kérdést szeretnék feltenni.
Are you interested in this machine?
We have the following options for you:
Request quote
Please send me a quote of this machine.
I want to add this machine to my request and look further.
Choose this option if you want a quotation on multiple machines.
I have a question about this specific machine.
I am interested in this machine but I want to ask a question first.