Description:

Mohn crate and tray washing and drying line (new condition)

Handinding of the machine are at ''documents''

Suitable for various type of trays and crates. Adjustable speed. Stainless steel. 

Pre-jetting zone
Shortly behind the filling of items to be washed, there is a pre-jetting device. This is operated via a solenoid valve and is always in function when the belt operation is switched on. The flow rate can be adjusted via a ball valve (see images in the annex) Approx. 100 to 200 litres of fresh water are required per hour.

Zone washing
This zone is equipped with a stainless steel centrifugal pump with a capacity of 4.00 kW (1,500 l/min at approx. 1.50 bar), distributed to a total of 8 nozzle arms with 70 flat jet nozzles, which ensure a thorough cleaning of all 4 sides. Contaminants are rinsed into a big external filter box with funnel overflow and hand hole. The washing tank has a volume of approx. 650 litres and is heated via 3 electric flange heaters with a capacity of 11.00 kW per piece. The washing temperature is approx. 50 to 55°C.

Zone clear rinsing
Cleaned products in the machine are thoroughly rinsed with fresh water from all 4 sides. Inflowing fresh water is heated to approx. 60 to 80°C via a boiler with a capacity of 22.00 kW. (Depending on the fresh water inlet temperature) Approx. 300 to 400 litres of fresh water are required per hour. The clear rinsing is used in multiple stages: 1. Fresh water clear rinsing 2. Replenishment of the washing tank

Zone neutral
The neutral zone is approx. 500 mm long and at this point vapour is continuously sucked off via a built-in Karl Klein stainless steel fan, the items to be washed drip off. Suction: 2 x 0,75kW. Capacity: 1500m3/hour each at 500Pa.  

Zone blow down
By means of two high-pressure fans, the items to be washed are blown down here. The fans have a capacity of 4.00 kW each. Via flow-optimised air knives, air is brought to the items to be washed, blowing it down from all sides, with the blown down water being guided back into the washing.

• Circulation pump 
• Crate height adjustable, suitable for 5 tot 31 cm high crates
• Crate width adjustable, suitable for 42 tot 82 cm wide crates
• Electr. ash value: 400V AC3 5 Hz
• Electr. power: 70 kW 
• Control voltage: 24V / DC

* Machine is dismantled for transport

Technical specifications: