Description:

The BRP (135M) plant harvester is suitable for harvesting strawberry plants, asparagus plants, perennials and certain types of nursery crops.

Working method

The harvesting depth is determined using the height-adjustable articulated drawbar. The soil and plants are transferred via the movable blade and harvesting roller onto the pin belt. Part of the soil falls away at the harvesting roller. The pin belt of the BRP\ML plant harvester pulls the remaining plants out of the soil. The plants are then transported upwards to the screening belt. This screening belt contains three agitators to shake the remaining soil from the plants. The plants are transported by means of a lateral discharge belt at the rear onto the wagon driving alongside. The lateral discharge belt has a directional flap at the end. The directional flap allows all corners of the wagon to be filled. The machine has a steerable wheel axle for sharp manoeuvring on the headland. The entire machine is controlled by means of a push-button control box in the tractor.

• Hydraulic system with pump set
• Fixed drawbar
• Fixed blade
• Harvesting roller with fixed strips
• Long pin belt
• Screening belt with agitators
• Steerable axle with centre position
• Working width: 135 cm
• Cylinder functions powered by tractor valve
• Electrical control box
•  Side discharge, 80 cm wide, foldable down, disassembled for transport
• Capacity: 300 to 2000 metres per hour
• Required power: min. 75 hp

Technical specifications: