Description:

Lauwers Borobos AL harvester for trees

Lauwers Borobos plant lifting machine / harvester for trees.

The Lauwers plant lifting machine has been especially developed for use in tree nurseries. It is designed to be mounted on to the right-hand side of the tractor. The frame is built from heavy square section tubing. This solid construction is necessary to withstand the enormous torque which develops during the fitting of larger trees. The whole machine is hydraulically driven. The lifting assembly with the ‘U’blade is attached to the tractor with the lifting cylinder

• With 3x U-blade approx 28 cm
• 1 x U-blade 17 cm

three large  wheels, with low roll resistance, support the machine during lifting operation. These improve machine stability, especially in wet ground conditions.

Once the plants have been cut tree by the wide ‘U’ blade, they are gripped between 2 soft rubber belts, which run on nylon rollers, equipped with bearings. After being lifted, the plants are automatically transferred to a conveyer belt at the rear of the machine. The machine assistant can then conveniently collect the plants and stack them.

The Lauwers BOROBOS gives you many benefits. With this machine you are able to lift all your trees from 30 to 180 cm high in a short time and with a minimum of labour. Two men are capable to harvest all your shrubs and conifers. The unique shaking system is designed to leave the roots free from soil whilst protecting the finest roots from damage.The machine allows row distances up from 25 cm.