Description:

Tumoba SP2 Brussel sprouts harvesting machine inspected and with additional safeguards

Tumoba SP2 checked harvester for brussels sprouts with exensive safety and transport trailer

• 2 row
• Fully checked
• Overhealed knive cutting heads
• Machine is modified by manufacturer with various safety measures (this is all brand new and costs 10.000 euro's) 
• • If a worker falls of the seat, the machine will stop automatic
  • The worker needs to have 1 foot on the a switch 
    • 2 x Saw valves for the saw.
  • The is a dead man's handle under the joystick
  • There a start protection under the joysticks
  • There a emergy stop cord
  • 2 x Reset / start-stop safety device above the picking heads
  • All this is brand new included PLC
  • 1 x Electric stop magnet on the Diesel engine 
  • This option is a must for the Canadian and US markets
• 1 side has blind insertion 
• Deutz 3 cylinder Diesel engine
• Discharge conveyor on top of the bunker 
• Tracks 45 cm wide
• With attached inspection cabin to do some pre inspection (can be taken off)
• With transport trailer  L x B x H 550 x 275 x 110 cm

The Tumoba SP2 are harvesters designed to enable the larger sproutgrower to obtain high output and minimise labour requirements, whilst protecting the condition of the soil, even under the most adverse conditions.

The operators are seated at the front of the machine, one for each row to be harvested. A foot controlled arm with a stalkcutter attached is provided for each row. As the machine progresses through the crop, stalks are cut and hand-fed into the stripping heads adjacent to each operator.The buttons and leaves are stripped from the stalk and separated, the leaves returning to the ground and the trimmed buttons being conveyed by an elevator, are delivered into a bulkhopper mounted in the centre of the machine. Each model is built on a track laying chassis and powered by a dieselengine mounted at the rear of the machine and driven hydraulically.